INF file for VIA USB 3.0 drivers v6.1.7600.4201

INF file for VIA USB 3.0 drivers v6.1.7600.4201

The VIA VL800 is a single chip USB 3.0 Host controller, which enables a PCI Express equipped platform to interface with USB Super-Speed (5 Gbps), High-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) devices. The root hub consists of four downstream facing ports enabling the simultaneous operation of multiple peripheral devices. The VIA VL800 complies with the Universal Serial Bus 3.0 Specification and Intel’s eXtensible Host Controller Interface (xHCI), and is fully backward compatible with USB 2.0 and 1.1 specifications, ensuring seamless connectivity of legacy USB devices. The VIA VL800 has a PCI Express 2.0 x1 interface that is backwards compatible with PCI Express 1.0 and is perfectly suited for both PC Host and Add-In Card applications.

Type

VIA INF file

Status WHQL
Version 6.1.7600.4201 File ViaHub3.inf
Release 2013-08-30    [August '13] Size 4 KB
;/*++
;
;Copyright (c) VIA Corporation. All rights reserved.
;
; THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
; KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
; IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR
; PURPOSE.
;
;Module Name:
;
; ViaHub3.INF
;
;Abstract:
; INF file for VIA eXtensible host controller hub
;
;--*/

[Version]
Signature = "$WINDOWS NT$"
Class = USB
ClassGuid = {36FC9E60-C465-11CF-8056-444553540000}
Provider = %VIA%
DriverVer=08/12/2013,6.1.7600.4201
CatalogFile = ViaHub3.cat

[DestinationDirs]
DefaultDestDir = 12

;-------------------------------------------------------------------------
; Device Install Section
;-------------------------------------------------------------------------
[ControlFlags]
ExcludeFromSelect = *

[Manufacturer]
%VIA%=VIA,NTamd64

[SourceDisksFiles]
ViaHub3.sys = 1

[SourceDisksNames]
1=%DISK_NAME%,

; For XP and later
[VIA.NTamd64]
; DisplayName Section DeviceId
; ----------- ------- --------
%VUSB3\ROOT_HUB30.DeviceDesc% = VUSB3HUB, USB\VIA_ROOT_HUB
%VUSB3\CLASS_09.DeviceDesc% = VUSB3HUB, VUSB3\CLASS_09
%VUSB2\CLASS_09.DeviceDesc% = VUSB3HUB, VUSB2\CLASS_09
%VUSB1\CLASS_09.DeviceDesc% = VUSB3HUB, VUSB1\CLASS_09
%VUSB2\CLASS_09&SUBCLASS_00&PROT_02.DeviceDesc% = VUSB3HUB, VUSB2\CLASS_09&SUBCLASS_00&PROT_02

[VUSB3HUB.NT]
CopyFiles = VUSB3HUB.CopyFiles

[VUSB3HUB.NT.HW]
AddReg = DefaultIdleAndWake.AddReg

[VUSB3HUB.CopyFiles]
ViaHub3.sys

[VUSB3HUB.NT.Services]
AddService = VUSB3HUB,0x00000002,VUSB3HUB_Service

[VUSB3HUB_Service]
DisplayName = %VUSB3HUB.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\ViaHub3.sys
LoadOrderGroup = Base
AddReg = SpecificParam

[SpecificParam]
HKR, "Parameters", "RPU1Timeout", 0x00010001, 0x40 ; Refer to Table 10-12 of USB3.0 spec
HKR, "Parameters", "RPU2Timeout", 0x00010001, 0x7F ; Refer to Table 10-13 of USB3.0 spec
HKR, "Parameters", "U1Timeout", 0x00010001, 0x40 ; Refer to Table 10-12 of USB3.0 spec
HKR, "Parameters", "U2Timeout", 0x00010001, 0x7F ; Refer to Table 10-13 of USB3.0 spec
HKR, "Parameters", "DisableSelectiveSuspend", 0x00010001, 0
HKR, "Parameters", "EnumRetryTimes", 0x00010001, 3

[DefaultIdleAndWake.AddReg]
HKR, "WDF", "WdfDefaultIdleInWorkingState", 0x00010001, 1
HKR, "WDF", "WdfDefaultWakeFromSleepState", 0x00010001, 1

;-------------------------------------------------------------------------
; WDF Coinstaller installation
;-------------------------------------------------------------------------
[DestinationDirs]
CoInstaller_CopyFiles = 11

[VUSB3HUB.NT.CoInstallers]
AddReg = CoInstaller_AddReg
CopyFiles = CoInstaller_CopyFiles

[CoInstaller_CopyFiles]
WdfCoInstaller01011.dll

[SourceDisksFiles]
WdfCoInstaller01011.dll = 1 ; make sure the number matches with SourceDisksNames

[CoInstaller_AddReg]
HKR,,CoInstallers32,0x00010000, "WdfCoInstaller01011.dll,WdfCoInstaller"

[VUSB3HUB.NT.Wdf]
KmdfService = VUSB3HUB, VUSB3HUB_wdfsect

[VUSB3HUB_wdfsect]
KmdfLibraryVersion = 1.11

;------------------------------------------------------------------------------
; String Definitions
;------------------------------------------------------------------------------

[Strings]
VIA = "VIA"
DISK_NAME = "USB3.0 HUB Installation Disk"
VUSB3\ROOT_HUB30.DeviceDesc = "VIA USB 3 Root Hub"
VUSB3\CLASS_09.DeviceDesc = "VIA USB 3 Hub"
VUSB2\CLASS_09.DeviceDesc = "VIA USB 2 Hub"
VUSB1\CLASS_09.DeviceDesc = "VIA USB 1 Hub"
VUSB2\CLASS_09&SUBCLASS_00&PROT_02.DeviceDesc = "VIA USB 2 MTT Hub"
VUSB3HUB.SvcDesc = "VIA USB 3 Root Hub Service"

Recommended

Latest USB3 drivers (by date)

Version Date Downloads
6.1.7600.4201 2013-08-30 20285×
1.0.9.254 2013-08-13 31258×
1.00.0000.0118 2013-07-29 19491×
3.5.100.0 2013-07-10 10291×
1.16.10.0 2013-07-01 57316×

Last added USB 3.0 drivers

Version Date Downloads
3.5.100.0 2013-07-10 10291×
2.1.39.0 2012-09-13 33949×
1.0.9.254 2013-08-13 31258×
6.1.7600.4201 2013-08-30 20285×
6.1.7600.4004 2013-04-12 2433×

TOP 5 downloaded USB 3.0 drivers

Version Date Downloads
1.16.10.0 2013-07-01 57316×
2.1.39.0 2012-09-13 33949×
1.0.9.254 2013-08-13 31258×
6.1.7600.4201 2013-08-30 20285×
1.00.0000.0118 2013-07-29 19491×
Copyright © 2006 - 2012, BUBIK s. r. o. | Designed by Bajola